Unlock more performance from your Can-Am Maverick X3 Turbo RR with KBR Powersports ECU tuning. With multiple tuning stages available, you can select a calibration built around your machine’s current modifications, fuel, and desired horsepower level.

From a stock-machine 180 HP calibration to 220 HP setups for machines equipped with supporting modifications and higher-octane fuel, our staged tuning options make it easy to choose the correct tune for your X3.

2021+ ECU Unlock Required

2020 and newer Can-Am Maverick X3 Turbo RR models require the factory ECU to be unlocked before tuning.

For these machines, the ECU must be removed and sent in for the required unlock service. Once the ECU has been unlocked, the selected performance calibration can be installed.

This is a one-time ECU unlock. After the ECU has been unlocked, it can be tuned and reflashed without repeating the unlock process.

Multiple Performance Levels

Choose the tune that matches your machine and performance goals:

• Stage 1 – Stock
  Designed for stock machines looking for an ECU performance upgrade without requiring additional engine modifications.

• Stage 2 – Exhaust
  Calibrated for machines equipped with an aftermarket exhaust

• Stage 3 – Exhaust
  A higher-output exhaust calibration

• Stage 4 – Exhaust + Charge Tubes
  Designed for machines equipped with an aftermarket exhaust and upgraded charge tubes

• Stage 5 – Exhaust + Charge Tubes / Max 93 Octane
  A more aggressive calibration for machines equipped with exhaust and charge tube upgrades and running the required 93-octane fuel.

• Stage 6 – Exhaust + Charge Tubes / 96–100 Octane
  Our highest staged option, targeting the required supporting modifications and 96–100 octane fuel.

Tune Matched to Your Setup

Performance tuning should match the hardware and fuel being used on the machine. Select the stage that corresponds with your X3's modifications and required fuel to ensure you receive the correct calibration for your setup.

Running a tune intended for different modifications or fuel than your machine is equipped with is not recommended.

Custom Tuning Available

For modified machines that fall outside of the standard tuning stages, custom tuning is available through SRE.

The customer provides data logs from the machine, allowing the calibration to be reviewed and adjusted specifically for the individual setup. This option is intended for machines requiring more individualized calibration than one of the standard staged tunes provides.

Built for Everything From Stock to High-Horsepower X3s

Whether you have a stock Maverick X3 Turbo RR and want a straightforward performance tune or you're building a modified machine capable of supporting a 220 HP calibration, KBR Powersports offers tuning options that allow you to choose the performance level that fits your build.

Available Power Levels: 180 HP – 220 HP
Fuel Requirements: Vary by selected tuning stage
Modification Requirements: Vary by selected tuning stage
2020+ Models: ECU removal and unlock service required before tuning
Custom Tuning: Available with customer-supplied data logs

OFF-ROAD USE DISCLAIMER

KBR Powersports performance calibrations are intended for off-road and competition use only. It is the purchaser’s responsibility to ensure that the installation and use of any calibration complies with all applicable federal, state, and local laws and regulations. KBR Powersports does not authorize the removal, disabling, or defeat of required emissions-control equipment. Performance modifications may affect the vehicle’s factory warranty and can increase stress on engine, drivetrain, and other components. By purchasing and installing a KBR Powersports calibration, the purchaser acknowledges and accepts these risks.